Uniway Infocom

UW3232 IP QAM Modulator is the latest generational Mux-scrambling-modulating all-in-one device developed by UNIWAY DEXIN. It has 32 multiplexing channels, 32 scrambling channels and 32 QAM (DVB-C) modulating channels, and supports maximum 1024 IP input through the GE port and 32 non-adjacent carriers (50MHz~960MHz) output through the RF output interface. The device is also characterized with high integrated level, high performance and low cost. This is very adaptable to newly generation CATV broadcasting system.

Key Features:

• 2 GE input, SFP interface
• Supports up to 1024 channels TS over UDP/RTP, unicast and multicast, IGMP v2\v3
• Max 840Mbps for each GE input
• Supports accurate PCR adjusting
• Supports CA PID filtering, remapping and PSI/SI editing
• Supports up to 180 PIDS remapping per channel
• Support DVB general scrambling system (ETR289), simulcrypt standards ETSI 101 197 and ETSI 103 197
• Support 32 multiplexed or scrambled TS over UDP/RTP/RTSP output
• 32 non-adjacent QAM carriers output, compliant to DVB-C (EN 300 429) and ITU-T J.83 A/B
• Support Web-based Network management

 

Technical Specification:

Uniway MPEG-4 Encoder (with IP output) is a professional audio & video encoding and multiplexing device. This device has 8 video input interfaces, 8 pairs of unbalanced analog stereo audio input interfaces and two ASI output interfaces which can output the multiplexed and encoded data. This device can simultaneously encode 8 channel audio & video signals and can multiplex one ASI input stream to MPTS. This can be managed by its IP interface. Features: 8 video input Multiplexes one ASI input 8 pairs of unbalance stereo audio input Supports MPTS or 8 x SPTS output over UDP LCD/Keyboard Network Management (SNMP) Supports MPEG-4 video encoding, and advanced video pre-treatment algorithm Simple Network Management Protocol software (SNMPS) for managing devices on IP network

Specification:

• Input 8 Video inputs (BNC interface) EL 2081
• 8 pairs unbalanced stereo audio input (BNC interface)
• 1 ASI stream input (BNC interface)
• Video Encoding MPEG-4
• Bit-rate 0.8Mbps ~ 19Mbps Each Channel
• Rate Control CBR/VBR
• GOP Structure IPPPP, IBPBP, IBBPB, IBBBP
• Advanced Pretreatment Algorithm De-interlacing, noise reduction, sharpening
• Audio Encoding MPEG-1 Layer 2, LC-AAC and AC3
• Sampling rate 48KHz
• Resolution 24-bit
• Bit-rate 32Kbps ~ 384Kbps each channel
• Multiplexing 1 ASI input multiplexed with local 8(4) channel
• Stream output 2-way ASI output, BNC interface
• MPTS or 8xSPTS over UDP, 10/100Base-T Ethernet interface EL 2081
• MPTS or 4xSPTS over UDP,10/100Base-T Ethernet interface EL 2041
• Miscellaneous Dimension (WxLxH) 482mm x 410mm x 44mm
• Approx weight 2.8kg
• Environment 0~45 C (work): -20 ~ 80 C (Storage)
• Power AC 100 ~ 240V ± 10%, 50/60MHz

 

Uniway UW-8T 8 Tuner Input Multiplexer is the latest demodulation and multiplexing device for digital TV broadcasting head-end system with TS output through ASI and IP port. It can multiplex up to 8 channels Tuner and 1 ASI input to one MPTS. This multiplexer has the functions of supporting auto-generation of PSI/SI information, PID re-mapping, service filtering and PCR adjusting. Also the multiplexer can insert EPG (electronic program guide), CA (conditional access), data broadcasting into output TS. In conclusion, its high integration and cost effective design make this device widely used in the CATV Broadcasting system.

 

Features

* Fully complying with ISO13818 and EN300 468 standard

* 8 Tuner(DVB-C/S2/ (T)/ATSC optional)+1 ASI input port---UW-8T

* ASI and IP output

* Integrated demodulating and multiplexing functions

* Support accurate PCR adjusting

* Support PID filtering, re-mapping

* Support PSI/SI rebuilding and editing

* Support MPTS over UDP, RTP/RTSP output as mirror of ASI output (RJ45)

* Huge buffer memory for saving the overflowing code stream

* Supporting to multiplex one program to all outputs

* Alarming function

* LCD/keyboard and Web-based NMS management

Uniway MPEG-2 Encoder  (with IP output) is a professional audio & video encoding and multiplexing device. This device has 8 video input interfaces, 8 pairs of unbalanced analog stereo audio input interfaces and two ASI output interfaces which can output the multiplexed and encoded data. This device can simultaneously encode 8 channel audio & video signals and can multiplex one ASI input stream to MPTS. This can be managed by its IP interface. Features: 8 video input Multiplexes one ASI input 8 pairs of unbalance stereo audio input Supports MPTS or 8 x SPTS output over UDP LCD/Keyboard Network Management (SNMP) Supports MPEG-2 video encoding, and advanced video pre-treatment algorithm Simple Network Management Protocol software (SNMPS) for managing devices on IP network

Specification:

• Input 8 Video inputs (BNC interface) EL 2081
• 8 pairs unbalanced stereo audio input (BNC interface)
• 1 ASI stream input (BNC interface)
• Video Encoding MPEG-2
• Bit-rate 0.8Mbps ~ 19Mbps Each Channel
• Rate Control CBR/VBR
• GOP Structure IPPPP, IBPBP, IBBPB, IBBBP
• Advanced Pretreatment Algorithm De-interlacing, noise reduction, sharpening
• Audio Encoding MPEG-1 Layer 2, LC-AAC and AC3
• Sampling rate 48KHz
• Resolution 24-bit
• Bit-rate 32Kbps ~ 384Kbps each channel
• Multiplexing 1 ASI input multiplexed with local 8(4) channel
• Stream output 2-way ASI output, BNC interface
• MPTS or 8xSPTS over UDP, 10/100Base-T Ethernet interface EL 2081
• MPTS or 4xSPTS over UDP,10/100Base-T Ethernet interface EL 2041

 

Fully complying with ISO13818 and EN300 468 standard

* 8 Tuner(DVB-C/S2/ (T)/ATSC optional)+1 ASI input port---UW-8T

* ASI and IP output

* Integrated demodulating and multiplexing functions

* Support accurate PCR adjusting

* Support PID filtering, re-mapping

* Support PSI/SI rebuilding and editing

* Support MPTS over UDP, RTP/RTSP output as mirror of ASI output (RJ45)

* Huge buffer memory for saving the overflowing code stream

* Supporting to multiplex one program to all outputs

* Alarming function

* LCD/keyboard and Web-based NMS management

DESCRIPTION

 

UNIWAY UW-8T 8 Tuner Input Multiplexer is the latest demodulation and multiplexing device for digital TV broadcasting head-end system with TS output through ASI and IP port. It can multiplex up to 8 channels Tuner and 1 ASI input to one MPTS. This multiplexer has the functions of supporting auto-generation of PSI/SI information, PID re-mapping, service filtering and PCR adjusting. Also the multiplexer can insert EPG (electronic program guide), CA (conditional access), data broadcasting into output TS. In conclusion, its high integration and cost effective design make this device widely used in the CATV Broadcasting system